Discover All Body Kits
Show Your Subaru Some Love
Iconic Cadillac Carbon Fiber Aero
Build Your Legendary Dodge
APR Performance Custom Carbon Fiber Front Splitter Lip
$913.99
In stock
APR Performance Front Wind Splitters integrate with the front bumper to reduce front-end lift and increase high-speed stability.
\APR Performance Front Wind Splitters are highly-effective at balancing the front-vs-rear downforce when used in conjunction with APR Performance Adjustable Wings.
DOWNFORCE BALANCE
The Downforce Balance graph (shown at the left) illustrates which areas of the vehicle this product affects. There are three (3) areas: Front, Center, and Rear. The size of the red bar represents how much this product affects each particular area.
BENEFITS
- Reduce front-end lift
- Maximize cornering speeds
- Enhance high-speed stability SPECIFICATIONS
| Pattern | 2×2 twill weave |
| Material | Pre-preg carbon fiber, 3K + pre-preg nomex honeycomb or Carbon fiber, 3K + fiberglass mat |
| Coating | UV-stable clear coat |
| Mounting | Custom mounting required (no pre-drilled holes) |
| Hardware | Stainless-steel machine screws, washers, nuts, and adjustable rods |
FEATURES
There are two types of APR Performance Front Wind Splitters.
The first type is the standard carbon fiber type. This type of splitter provides good strength and rigidity and is suitable for moderate racing conditions.
The second type is the carbon fiber + nomex honeycomb type. This type of splitter provides the highest strength and rigidity at the lowest possible weight per square inch, and is suitable for high-speed racing conditions.
Every APR Performance Front Wind Splitter is shaped to conform to the factory bumper (standard applications) or shaped per customer requirements (custom applications).
Adjustable stainless-steel support rods are included with every APR Performance Front Wind Splitter.
CUSTOM APPLICATIONS
Custom Applications Available – Can’t find an APR Performance Front Wind Splitter application for your car? APR Performance can create custom Front Wind Splitters for any application. Please follow the instructions below: 1. Find a large sheet of cardboard. 2. Place the cardboard underneath the front bumper. 3. Draw the bumper bottom outline onto the cardboard. 4. Fold up the cardboard and send it to us at: APR Performance, Inc. 225 Pacific St Pomona, CA 91768 Estimated working time: 3-4 weeks. Additional Guidelines: *For non-honeycomb splitters: – Width cannot exceed 80”. – Depth beyond 24″ is subject to an additional material charge of $28 for every 2″ of depth. *Bottom of the bumper requires at least 3”~ 4” of flat surface all around to mount the splitter. *Fold your template in the center to check if both curves match each other.
Warning The user assumes full responsibility for ensuring proper installation as intended. Professional installation by well-qualified personnel is highly recommended. The vehicle applications shown above are intended to work as a complete system when installed onto original vehicle body parts (i.e. front bumpers, air dams, etc.). To ensure proper function and reliability, APR Performance advises against modification or substitution of any component of the intended installation. Any modification or substitution of hardware included with the splitter create unsafe operating conditions and ultimately cause this system to fail. Substitution of original vehicle manufacturer parts needed for the intended installation (i.e. front bumper) with non-original parts may also create unsafe operating conditions and ultimately cause this system to fail.
Brand
APR Performance
Related products
Splitter Rods
Splitter Rods
Splitter Rods
Splitter Rods
Splitter Rods
Shop All Products
Reviews
There are no reviews yet